Beginners guide to hacking windows by WindowsHacker

Beginners guide to hacking windows by WindowsHacker

[color=#000000]The best way to start hacking is to teach yourself !!! All programs mentioned can be downloaded from

[color:3309=#000000:3309]http://www.windowshacker.kickme.to/

In this tutorial there will be explained the basics of hacking and some more advanced hacking techniques. So if your a n00b, read on! VERY IMPORTANT, GOOGLE IS YOUR BEST FRIEND WHEN YOU WANT TO LEARN HOW TO HACK!!

http://www.windowshacker.kickme.to

http://www.windowsh4cker.kickme.to

Windows Hacker Tutorial V2.4



Contents
1) FAQ - Frequently Asked Questions
2) Securing your Windows PC


How do I hack? - There is no easy way how to hack. Google is your best friend.. REMEMBER THAT! Read any information you can find on hacking. Read hacking forums and check out hacking websites. Learn a programming language like C++. Get a book like Hacking for Dummies which will teach you alot.

What do I need to be able to hack? - Firstly you need to understand how your computers operating system works, networks and protocols works, security settings and general PC knowledge. After you understand how it works you need hacking tools which helps you to hack.

What is command prompt (cmd- the little dos Windows)? - Go START, RUN and type in: "cmd"

What can I do in cmd? - You can can do various things with it like run exploits or do a ping request.

Why does some of the hacking tools I download just close itself when I open them? - Lot's of hacking tools are DOS based and has to be run through CMD. If you double click on the program it will open a DOS box and automaticly close the box. From CMD you can navigate to the directory which your hacking tool is stored in and run it from there. Other hacking tools are GUI ( graphical user interface ) based and it will open like a normal Windows based program.

What is a IP address? - Every computer connected to the Internet or some network has a IP address. Goto START, RUN and type in "cmd" then type in "ipconfig" it will show you your IP adress or adresses. It will look something like this : 81.35.99.84. IP = internet protocol.

How do I find someone's IP adress? - Look further down in this tutorial and use IPSTEALER

What can I do with a IP? - Well you need someone's IP before you can hack, portscan or DOS them.

What is IP ping ? - It's a command you can use to check if someone's IP address is online, to check it they connected to the Internet or a network. In command prompt type in "ping 192.168.0.21" - this will show you something like this :
Pinging 192.168.0.21 with 32 bytes of data:
Reply from 192.168.0.21: bytes=32 time<1ms TTL=128
Reply from 192.168.0.21: bytes=32 time<1ms TTL=128
Reply from 192.168.0.21: bytes=32 time<1ms TTL=128
Reply from 192.168.0.21: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.21:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
That means you can succesfully PING IP 192.168.0.21 which means the IP is online. If you get a message "request timed out" it means the IP is not online.
Bytes=32 is the ammount of data which was sent to the host.
Time<1ms is the time the host took to reply.
Now remember that even though you cannot ping a IP, it does not mean the host is not online, ping requests might just be blocked.

Why can't I ping a certain IP? - Either the IP is not online/ in use or the person your trying to ping is running a firewall which blocks ping requests or maybe your firewall is blocking outgoing ping requests

What is 127.0.0.1 IP? - It is your PC's local loopback IP address.

Why do I have two IP addresses when I do a ipconfig? - Well if your on a local LAN (Local area network) you will have a IP like 192.168.0.1. If your also connected to the internet you will have another IP address like 80.87.34.56. 192.168.0.1 is your local IP which you use to comunicate with your local internet network (lan) and 80.87.34.56 is your internet IP.

What is a static and dynamic IP address? - Static means permanent set IP address - like a website will have a static IP address, it never changes. Dynamic means temporary IP address - dailing up to the Internet with a modem or most ADSL connections has dynamic IP's. Everytime you logon to the Internet your ISP ( Internet Service Provider ) will issue you a new IP address.

I have sent someone a trojan but I cannot connect to their PC? - Either they are running a firewall which blocks you from connecting to their PC, or they are connected to the internet through a router.

What do I do when someone is behind a router and I want to control their PC with a trojan? - You will need to use a trojan which uses reverse connections - meaning you don't connect to the host, the host connects to you. Bifrost is a trojan which has the mentioned function. Remember when someone is behind a router and your using IPstealer to get hold of their IP address, you are actually getting their routers IP, not their actual PC's IP. The router will have the persons internet IP (WAN IP) and their PC will have a difirent IP - their LAN IP.

How do I check if my own PC is infected with a trojan? - Do a port scan on your PC and check which ports are open. If you find any open ports in this trojan port list you might be infected with a trojan. Download the trojan you think you might be infected with and connect to that specified port.

What is a router? - A device which is used to route data on a network. a Router decides where certain traffic should be sent to.

What is a firewall? - Its a software or hardware device which can block or permit certain ports or IP's or certain kinds of data.

http://www.datastronghold.com/security-articles/hacking-articles/tricky-command.html